상품상세정보
Hobbywing XERUN XR10 Justock G3 & G2.1 17.5 Turn Motor
The Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 motor is an ideal stock motor for both 1/10 and 1/12 on and off-road racing. These two components paired together make for an ideal choice for beginners and experts alike.
Features:
- ESC:
- Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
- Programmable via OTA Bluetooth module or 3in1 program box
- Built-in capacitor module eliminates the need for external capacitors and unwanted space
- RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
- Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
- Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
- Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
- Supports both CCW (counterclockwise) and CW (clockwise) motor directions
- Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
- Supports ESC firmware upgrades
- User-friendly and convenient for set-up
- Motor:
- Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability
- Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand
- Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor
- Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency
- This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice
- The motor design is in compliance with IFMAR, and ROAR specifications
Specifications:- ESC:
- Continuous Current: 60A
- Burst Current: 380A
- Battery: 2S Lipo (Only 2S)
- Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
- ESC programming: Independent programming port
- Motor Supported: Sensor and sensorless brushless motor
- Motor Limit: 10.5T, or greater, 3650 Motor
- Application: 1/10, 1/12 On-road and Off-road
- Cooling Fan: Powered by BEC
- Size: 40.9x33.9x32.1mm (LxWxH)
- Weight: 75.4g (Including weight of wire)
- Motor:
- Scale: 1/10, 1/12
- Brushless: Yes
- Sensored: Yes
- Pole Count: 2
- KV Rating: 2450
- LiPo Cells: 2-3S
- No-Load Current(A): 3.5
- Outer Diameter: 35.9mm (1.413")
- Length: 52.5mm (2.067")
- Shaft Diameter: 3.17mm (0.125")
- Weight: 176g (6.21oz)
- Timing: Fixed
Includes:
- (1) Justock G3 ESC
- (1) Justock 17.5t G2.1 brushless motor
- (1) 5V cooling fan
- (1) Sensor cable
■HOBBYWING A/S 정책 안내 - 한국공식수입사: (주)용산알씨
- 하비윙 본사 정책에 따라 A/S 정책을 아래와 같이 공지합니다.
1. 수입사의 수입 워런티코드(Warranty Code)가 등록되어 있는 제품에 한해 구매일로부터 180일 이내
- 구매영수증/거래내역서를 보유하신 고객 또는 생산일로부터 240일 이내인 제품만 접수 가능
- 생산일 확인은 수입사에서 바코드 조회로 가능
2. A/S 접수와 초기불량 교환 등은 반드시 구매처를 통해 접수해주시기 바랍니다.
3. FPV 제품은 구매영수증 첨부가 반드시 필요합니다.
4. FPV 제품의 A/S는 구매일로부터 90일 이내, 최대 1회로 제한됩니다. (예: 4in160A를 1회 A/S 후 고장 시 서비스 불가)
5. 초기 불량 정의: 구매일로부터 7일 이내 작동이 안되고, 외적/내적 손상이 없을 시에만 접수가 가능합니다.
- 사용 흔적 또는 새제품 대비 외관 손상이 일절 없어야 초기 불량으로 인정됩니다.
- 방문 또는 택배로 7일 이내 접수(도착 기준)되어야 하고 예외 사항은 없습니다.
6. 아래 사진과 같이 제품에 워런티코드가 반드시 부착되어 있어야 합니다.
- 비고: A/S 기간이 만료되었거나 수리 이력이 있는 제품은 더 이상 서비스가 불가한 점 유의 바랍니다.
7. 워런티 기간의 종료 또는 무효 처리
- 제조일로부터 240일 초과 또는 구매일로부터 180일 초과 시 종료
- 사용자가 제품의 내부 구조를 변경/수정했거나 부적절한 용도(RC 외 또는 비방수 제품을 물에서 사용 등)로 사용했을 경우
- 제품 자체의 워런티 바코드 스티커 훼손으로 정품 확인이 어려운 경우
8. RTR 또는 RTF 제품은 HOBBYWING OEM 생산의 경우에도 A/S가 불가하며, 2차 구매(중고거래 등), 해외 구매 등의 경우에도 A/S가 불가 합니다.
9. 모든 A/S 관련 비용은 유상처리 될 수 있고, 배송 관련 비용 또한 사용자에게 청구됩니다.
- 해외 물류비용의 부담으로 인해 일정 수량을 모아 본사 A/S가 진행됨에 따라 처리가 지연될 수 있습니다.
- 단 소비자의 요청으로 개별 발송을 원하실 경우 해외특송(FEDEX, DHL, UPS)을 통해 사전 동의 후 처리가 가능합니다.